Service
Stump grinding in Rossville, GA and the Chattanooga area
A cleared lot, pasture, or tree line full of stumps? We grind them below the surface, many at a time, so you can mow, plant, or build.
Quick answer
Stump grinding chips a tree stump away below ground level and leaves the roots to rot naturally. Logos Land Clearing grinds many stumps at a time: cleared lots, pastures, fence lines, and storm or logging cleanup within about 40 minutes of Rossville, GA. Our grinder is a skid steer attachment, so jobs have a $500 minimum. It's available on its own, or as the last step of land clearing.
- Best for
- Many stumps at once ($500 minimum)
- Grinding depth
- About 8 in. below the surface
- Leaves behind
- Wood grindings, raked into the hole
- Equipment
- RayTree RMSG29 grinder (29-in. wheel) on a New Holland C190 tracked skid steer
When to grind stumps
- Cleared lots and house sites, after felling larger trees
- Fields and pastures where stumps catch mowers and equipment
- Old logging or storm cleanup that left stumps scattered across the land
- Driveways, fence lines, and building pads that need a clean surface
Why we grind many stumps at a time
Our stump grinder is a RayTree RMSG29 attachment that runs on our New Holland C190 tracked skid steer. It's fast and strong, but hauling a skid steer to your property costs about the same whether there's one stump or fifty. That's why we have a $500 job minimum, and why stump grinding is the best value when you have a lot of stumps, or when it's added to a clearing job we're already doing. If you only have one or two yard stumps, a stump grinding company with a small walk-behind grinder will usually cost you less.
Where stump grinding fits
Stump grinding is the finishing step. After forestry mulching or chainsaw felling, stumps are still sticking out of the ground. If the area just needs to be open and walkable, they can stay. If you plan to mow, plant, or build, grinding takes them below the surface.
Stump grinding vs. stump removal
Grinding chips the stump away below ground and leaves the roots to decay, so it's faster, costs less, and leaves only a small, shallow hole. Full stump removal pulls out the stump and root ball and leaves a large hole that has to be filled. For most cleared land, grinding is the better choice. Where the roots have to come out, such as a septic drain field, we pull them with our John Deere 50D compact excavator instead.
What does stump grinding cost?
Stump grinding is priced per stump, typically $65 to $135 for a stump under 12 inches across, $135 to $270 for 12 to 24 inches, and $270 and up for larger stumps, with a $500 minimum per job. Price depends on the stump diameter, how many stumps there are, the root spread, and access. See our land clearing cost guide.
How it works
- Text us photos of the stumps, with something for scale (a boot or tape measure works), and roughly how many there are.
- Get a quote.
- We grind them. We call 811 first so buried utility lines are marked.
- Clean finish. Grindings raked back into the hole, ready for topsoil and seed.
Stump grinding questions
How deep do you grind stumps?
About 8 inches below the surface. Our RayTree RMSG29 skid steer grinder is rated to cut about 8½ inches below ground. That's deep enough to cover the spot with topsoil and grow grass over it.
What happens to the wood grindings?
Grinding turns the stump into a pile of wood chips and soil. We rake it back into the hole, or leave it for you to use as mulch. We don't haul grindings away.
What's the difference between stump grinding and stump removal?
Stump grinding chips the stump away below the surface and leaves the roots in the ground to rot naturally. It's faster, cheaper, and leaves only a small, shallow hole. Stump removal pulls out the whole stump and root ball, usually with an excavator, and leaves a larger hole that needs filling. We do both: grinding for most cleared land, and removal with our John Deere 50D compact excavator where the roots have to come out, such as a septic drain field.
Do you grind just one or two stumps?
Usually not. Our stump grinder is a skid steer attachment, so bringing it out costs about the same for one stump as for fifty, and our minimum is $500 per job. We're the right call when you have many stumps, such as a cleared lot, a pasture, or a fence line, or when grinding is added to a clearing job. For one or two yard stumps, a stump grinding company with a small walk-behind grinder will usually cost you less.
Do you grind just one or two stumps?
Usually not. Our stump grinder is a skid steer attachment, so bringing it out costs about the same for one stump as for fifty, and our minimum is $500 per job. We're the right call when you have many stumps, such as a cleared lot, a pasture, or a fence line, or when grinding is added to a clearing job. For one or two yard stumps, a stump grinding company with a small walk-behind grinder will usually cost you less.
Do buried utility lines need to be marked before stump grinding?
Yes, if there's any chance of buried lines nearby. We place the 811 request ourselves before we grind, and it's free (Georgia 811, Tennessee 811). The utility companies then mark their lines before we start.
Last updated November 17, 2026 by Logos Land Clearing.
Get a quote for stump grinding by text
Text us a few photos and the property location. Texting is the fastest way to reach us, and photos help us give you a more accurate estimate.
- 2–3 photos of the area
- Town or address
- Rough size (acres, or "about a backyard")
On a computer? Point your phone's camera at this code to start a text to us.