LogosLand Clearing Text for a quote

Service

Land clearing in Rossville, GA and the Chattanooga area

From overgrown acreage to a usable house site, pasture, or view. One plan and one price, using the right method for everything growing on your land.

Quick answer

Land clearing takes overgrown or wooded land down to usable ground. Logos Land Clearing combines brush hogging (growth under 2 inches), forestry mulching (brush and trees up to 6 inches), chainsaw felling (trees over 6 inches), and stump grinding into one job, within about 40 minutes of Rossville, GA.

Handles
Everything, including trees over 6 in.
Methods
Brush hog, mulcher, chainsaw, stump grinder
Leaves behind
Cleared ground with a mulch layer; logs hauled away
Equipment
New Holland C190 tracked skid steer (high flow), John Deere 50D excavator, chainsaws
Area
45 ZIP codes in GA & TN

What we clear land for

  • House sites and building pads
  • Driveways and access roads
  • Septic drain fields, with the roots pulled out and the soil kept loose (more below)
  • Pastures and food plots
  • Views and open space
  • Property and fence lines, before a survey or new fence
  • Overgrown inherited or newly bought land you want to see and use

How we clear land, step by step

Every property is a mix of sizes, so we use the right tool for each:

  1. Grass, weeds, briars, saplings

    Under 2 in. thick, on flat, open ground

    Brush Hogging
  2. Thick brush & small trees

    Up to 6 in. diameter, including wooded and sloped ground

    Forestry Mulching
  3. Bigger trees

    Over 6 in.: felled by chainsaw as part of land clearing

    Chainsaw felling
  4. Leftover stumps

    Ground below the surface for a finished, usable area

    Stump Grinding

On a typical wooded lot, the large trees come down first by chainsaw, the brush and small trees are mulched, and the stumps are ground last.

What's left when we're done

Clear, open ground covered in a layer of wood mulch, with no brush piles left to burn. Trees we cut down by chainsaw are hauled away, so you're not left with a pile of logs. If stump grinding is part of the job, the stumps are ground about 8 inches below the surface.

Clearing for a septic drain field

Clearing for a septic drain field is tricky because two goals pull against each other. The roots have to come out, because stumps and roots left in the ground get in the way of the trenches and lines. But the soil has to stay loose. Heavy equipment driving back and forth can compact it, and compacted soil can't soak up and treat wastewater the way the drain field was designed to.

We pull the roots and stumps with our John Deere 50D compact excavator. It weighs about 10,500 lb, but its long tracks spread that weight so it presses on the ground at only about 4.4 psi. The excavator can also reach in from the edge of the area instead of driving across it, and we wait for the ground to dry out before working on it, since wet soil compacts much more easily.

If your septic designer or the health department has already marked where the drain field goes, text us the site plan or a photo of the flags along with photos of the area.

Do you need a permit to clear land in Georgia?

It depends on how much soil the job disturbs. Under Georgia's Erosion and Sedimentation Act, a project that disturbs less than one acre is generally exempt, unless it's within 200 feet of a stream or other state waters or part of a larger development. A project that disturbs one acre or more needs a land disturbance permit, with an erosion and sediment control plan, before work starts.

What counts as disturbing the soil is the key question:

  • Forestry mulching grinds brush and small trees above ground and leaves the stumps, roots, and soil in place under a layer of mulch. Because it doesn't break open the soil, mulching alone generally doesn't need a land disturbance permit.
  • Logging is exempt as a forestry practice, which is why loggers can clear-cut a tract and leave the stumps without a permit.
  • Pulling, grinding, or cutting out roots and stumps does disturb the soil. If that covers more than an acre, the job needs a permit.

Counties can set their own rules on top of the state's, so on any job that may cross the one-acre line we check with the county first and tell you up front whether a permit is needed. In Tennessee, sites that disturb one acre or more need coverage under the state's construction stormwater permit. This is general information, not legal advice.

What does land clearing cost?

Land clearing typically runs $1,200 to $4,250 per acre: the low end for overgrown fields, the high end for thick woods with large trees and stumps. The biggest factors are tree size and density, acreage, slope, access, and what you want left behind. See our land clearing cost guide.

How it works

  1. Text us photos and the location (a map pin or address helps).
  2. Walk the property and agree on what stays and what goes.
  3. Get one price for the whole job.
  4. We clear it, and you walk the finished site with us.

Land clearing questions

What does land clearing include?

Land clearing takes an overgrown or wooded area down to usable ground. We match the method to what's growing there: brush hogging for open fields, forestry mulching for brush and trees up to 6 inches, chainsaw felling for anything bigger, and stump grinding to finish. You get one plan and one price for the whole job.

How do you handle trees bigger than 6 inches?

Trees over 6 inches in diameter are cut down by chainsaw. We haul the logs away. Their stumps can then be ground out with our stump grinder.

Can you clear a lot for a new house or driveway?

Yes. Clearing a house site or a driveway path is one of the most common reasons people call. We don't do grading or dirt work yet, so we clear the site and leave it ready for your builder or grading contractor.

Do you remove roots (grubbing)?

Yes, where the roots need to come out. We pull roots and stumps with our John Deere 50D compact excavator, for example on a septic drain field. On most other cleared land, grinding the stumps below the surface is faster and cheaper, and the roots rot away on their own.

Can you clear land for a septic drain field?

Yes. A drain field needs the roots taken out but the soil left loose, because heavy equipment can compact the soil so it can't absorb water. We pull roots and stumps with a John Deere 50D compact excavator, whose tracks press on the ground at only about 4.4 psi, reach in from the edge instead of driving across the area, and wait for dry ground. If your septic designer has marked the drain field, text us the site plan.

Do I need a permit to clear land in Georgia?

Only if the job disturbs the soil on one acre or more. Georgia's Erosion and Sedimentation Act exempts projects under one acre, unless they're within 200 feet of a stream or part of a larger development. Forestry mulching leaves the stumps, roots, and soil in place, so it generally doesn't need a permit. Pulling or grinding out roots and stumps on more than an acre does, along with an erosion and sediment control plan. We check with the county and tell you up front. More on permits.

Do I need a permit to clear my land?

It depends on how much soil is disturbed and where you are. In Georgia, land-disturbing projects of 1 acre or more generally need a land disturbance permit, issued by the city or county (Georgia Soil and Water Conservation Commission), and work near streams has buffer rules. In Tennessee, construction activity that disturbs 1 acre or more needs coverage under the state's construction stormwater permit (TDEC). Some cities require a permit for any amount. Forestry mulching and brush hogging leave the soil and roots in place, but check with your county or city before a large project. We're happy to talk it through.

Last updated November 17, 2026 by Logos Land Clearing.

Get a quote for land clearing by text

Text us a few photos and the property location. Texting is the fastest way to reach us, and photos help us give you a more accurate estimate.

  • 2–3 photos of the area
  • Town or address
  • Rough size (acres, or "about a backyard")
Text (423) 417-1770
QR code: scan with your phone camera to text us

On a computer? Point your phone's camera at this code to start a text to us.